본문 바로가기 주메뉴 바로가기

New Product

[DTI] Introducing the OPC10M Optocoupler

17-09-13
DTI's NEW Octocoupler!

For some time Dean Technology has been providing custom solutions to customers using optical diode technology.  We are now moving to make these a part of our standard product offering, staring with a 10 kV optical switch / optocoupler, the OPC10M.

This first optical device from DTI consists of a central diode with two LED drivers allowing for variable high voltage output from a low voltage reference input, and should provide an ideal solution for most applications where this kind of device can be used.

See the full press release for the OPC10 hear, and full product details are always available on our website.




[Aimtec] Introduces 45W Photovoltaic DC/DC Converter

17-07-19
Aimtec_new product_170719.jpg
The AM45W-NST with an output power of 45W has the largest input voltage range on the market, ranging from 150-1500VDC and can reach a maximum of 1600VDC for up to 1 second. In addition, the new series comes equipped with a regulated dual output signal and a high input to output isolation of 4000VAC tested over a 60 second cycle during manufacturing.

The series also supports 3 Nominal input voltage levels of 200, 850 & 1400VDC and separates the output voltages to two ±15VDC outputs. Operating temperature are within the -40°C to 85°C range. This series is designed to meet the solar energy conversion into DC electricity requirements for Photovoltaic Power Generation and High-voltage Inverters.

The AM45W-NST, is available in a 5.69 x 4.13 x 1.57-inch (144.50 x 105.00 x 40.00 mm) metal enclosed package with screw terminals for easy wire connection. Many safety features such as Over Voltage and Over current output protection, Continuous Short Circuit Protection, Input Under Voltage Lockout and Reversed connection protection come standard. Finally, this addition also features a 2 second maximal start-up time for quick response times.

Samples are available from stock and can be ordered immediately from any of Aimtec's global network of Franchised Distributors. Visit www.aimtec.com for more product information or to locate your nearest Distributor.

Data Sheet



[Aimtec] AMEM5-Y 5W PSU Enclosed in 1x1 Inch Package

17-07-18
Aimtec_new product_170718.jpg
 The new AMEM5-Y, 5W AC/DC power supply featuring 4000VAC Isolationenclosed in a 1x1 inch package 
Aimtec_new product_AMEM5_170718.jpg
 
The new high power density AC/DC converters are available in the small 1x1 inch PCB mountable package, boasting the lowest height profile in the 4000VAC isolation range.
 
The AMEM5-Y series features a 10,000μF Maximum Capacitance load and many protective features such as over load, over voltage and continuous short circuit protection. Additionally, it offers a no-load consumption below 0.2W and no minimum load is required for operation within the specification range. These new power converters will simplify industrial and commercial product designs while increasing their abordability.
Standard models are available with a 3.3, 5, 9, 12, 15, 24, 36 and 48VDC output and have a universal input of 85 to 264VAC, 47 to 63Hz, or 120 to 370VDC. Operating temperature ranges from -25°C to 70°C, with derating starting at 50°C.
In addition, AMEM5-Y meets EN55022, EN55023, CISPR 22/23 class B, FCC Part 15 requirements without any external components and are UL listed.

Samples are available from stock and can be ordered immediately from any of Aimtec's global network of Franchised Distributors. Visit www.aimtec.com for more product information or to locate your nearest Distributor.