주메뉴
고전압 파워 서플라이
고전압 파워 서플라이 > 고전압 파워 모듈
> Single Output High Voltage Module 
Data Sheet(1K-3K)
- Outputs up to 3kV (Positive or negative polarity)
- Output proportional to input
- 1.5W continuous output power
- No minimum load requirements
- Input polarity protected
- Open and short circuit protected
- EU RoHS compliant to 2011/65/EU
- CE marked (LVD)
- Output proportional to input
- 1.5W continuous output power
- No minimum load requirements
- Input polarity protected
- Open and short circuit protected
- EU RoHS compliant to 2011/65/EU
- CE marked (LVD)
- Industrial ink jet printing
- Electrostatic precipitation
- Electron microscopes
- Geiger-Muller tubes
- Photomultiplier tubes
- Electron beam deflection and focussing
- Analytical instruments
- Piezo actuators
- Electrostatic precipitation
- Electron microscopes
- Geiger-Muller tubes
- Photomultiplier tubes
- Electron beam deflection and focussing
- Analytical instruments
- Piezo actuators
The Series MPM is a unique range of low cost, DC to DC high voltage power supply modules providing a miniature, precision PCB mount solution for a number of general purpose applications.
Please note that the Series MPM is a modern, technologically advanced, fully compatible replacement for the Series GMA DC-DC converters previously in our product range.
The Series MPM offers output voltages ranging from 100V to 3kV, from an input voltage of either 12V or 24V, with maximum continuous output power of 1.5W. The MPM's unregulated output is proportional to the input voltage over a 10% to 100% input range.
Standard MPM modules are three pin devices which provide a common 0V for input and output. All models are available with a range of input and output voltages, with either positive or negative output.
These DC-DC converters are vacuum encapsulated in silicone rubber in an ABS case to ensure maximum reliability, safety and consistent operation over wide environmental conditions.
Custom-built versions are available on request.
The Series MPM offers output voltages ranging from 100V to 3kV, from an input voltage of either 12V or 24V, with maximum continuous output power of 1.5W. The MPM's unregulated output is proportional to the input voltage over a 10% to 100% input range.
Standard MPM modules are three pin devices which provide a common 0V for input and output. All models are available with a range of input and output voltages, with either positive or negative output.
These DC-DC converters are vacuum encapsulated in silicone rubber in an ABS case to ensure maximum reliability, safety and consistent operation over wide environmental conditions.
Custom-built versions are available on request.
| Model | Input Voltage | Output Voltage | Output Current (Max) | Output Power |
|---|---|---|---|---|
| MPM12-100 | 12V | 100V | 15mA | 1.5W |
| MPM24-100 | 24V | 100V | 15mA | 1.5W |
| MPM12-200 | 12V | 200V | 7.5mA | 1.5W |
| MPM24-200 | 24V | 200V | 7.5mA | 1.5W |
| MPM12-300 | 12V | 300V | 5mA | 1.5W |
| MPM24-300 | 24V | 300V | 5mA | 1.5W |
| MPM12-500 | 12V | 500V | 3mA | 1.5W |
| MPM24-500 | 24V | 500V | 3mA | 1.5W |
| MPM12-1K | 12V | 1kV | 1.5mA | 1.5W |
| MPM24-1K | 24V | 1kV | 1.5mA | 1.5W |
| MPM12-1K5 | 12V | 1.5kV | 1mA | 1.5W |
| MPM24-1K5 | 24V | 1.5kV | 1mA | 1.5W |
| MPM12-2K | 12V | 2kV | 0.75mA | 1.5W |
| MPM24-2K | 24V | 2kV | 0.75mA | 1.5W |
| MPM12-3K | 12V | 3kV | 0.5mA | 1.5W |
| MPM24-3K | 24V | 3kV | 0.5mA | 1.5W |
